Circutor DHB Series Manual de usuario descargar pdf (Pagina 45)

Bit 15 Not used

Bit 14 Not used

Meter status. Describes the current state of the

meter. Successive bits present the given event. The

bit set on 1 means, that the event took place. Events

can be only erased.

Bit 13 Not used

Bit 12 Not used

Bit 11 Not used

Bit 10 Not used

Bit 9 Status of the RESET input

Bit 8 Status of the START / STOP input.

Bit 7 LED4 – Signaling of alarm No. 4.

Bit 6 LED3 – Signaling of alarm No. 3.

Bit 5 LED2 – Signaling of alarm No. 2.

Bit 4 LED1 – Signaling of alarm No. 1.

Bit 3 Status of the alarm relay 4.

Bit 2 Status of the alarm relay 3.

Bit 1 Status of the alarm relay 2.

Bit 0 Status of the alarm relay 1.

4049 Status2 w/r

Bit 14 RTC clock. Loss of settings

Bit 13 Not used

Bit 12 Lack of communication with data memory

Bit 11 Wrong settings

Bit 10 Manufacturer’ s settings restored

Bit 9 Lack of measured values in data

memory

Bit 8 Reset of the auxiliary counter

Bit 7 Output plate is detected

Bit 6 Output plate – error or lack of calibration

Bit 5 Reset of the main counter (the counter

has been automatically erased)

Bit 4 Not used

Bit 3 Wrong configuration of the individual

characteristic.

Bit 2 Not used

Bit 1 Not used

Bit 0 The averaging period Has not elapsed

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Sin comentarios

Circutor DHB Series Manual de usuario Pagina 45