Circutor PowerStudio Series Manual de usuario Pagina 262
- Pagina / 292
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
PowerStudio PowerStudio
262 User Manual
Displays general information about the device.
Value of the kWh which will be charged for the recharging. Allows you to enter a different price
for each plug.
• Euros of credit: Credit in Euros that the X2 device will subtract from the card's credit on
starting recharging. On completing recharging, the X3 device will be responsible for returning
the credit not consumed. This parameter is common to both plugs.
• Charge time limit for each plug (min): Maximum charge time. This parameter is common to
both plugs.
• Reset time limit for the cycle by forgetting open cover(s): Whole value in seconds.
Maximum current value supported by each terminal.
Operating mode 1:
• Bit 0: Paid or free service.
o 0 = Paid 1 = Free
• Bit 1: Charge time limit.
o 0 = Without 1 = With
• Bit 2: Credits.
o 0 = Credit units 1 = All credit available
• Bit 3: "Anti-theft" meter system, Plug 1 and 2.
o 0 = YES 1 = NO
• Bit 4: Continue cycle after a "Power Fail".
o 0 = NO 1 = YES
• Bit 5: Plug 1. Functionality.
- POWERSTUDIO 1
- USER MANUAL 4 / 4 1
- CONTENTS 4
- LOG OF REVISIONS 10
- 1.- DEVICES 11
- 1.1.1 Driver parameters 11
- 1.1.2 Variable units 13
- 1.1.3 Variable limits 14
- 1.2.- AFQ (Active filter) 15
- 1.2.1 Driver options 15
- 1.2.1.1 Device parameters 15
- 1.3.- C-14d 17
- 1.3.1 Driver options 17
- 1.3.1.1 Device parameters 17
- 1.3.2 Displaying values 18
- 1.4.- IP Camera 19
- 1.4.1 Adding an IP Camera 19
- 1.5.- TAG READER 21
- 1.5.1 Driver options 21
- 1.5.1.1 Driver Parameters 21
- 1.5.1.2 Device parameters 22
- 1.6.- CBS-4 /CBS-4 RA 23
- 1.6.1 Driver options 23
- 1.6.1.1 Device parameters 23
- 1.6.1.1.2 CBS-4 RA 25
- 1.6.2 Displaying values 27
- 1.7.- CBS-8 29
- 1.7.1 Driver options 29
- 1.7.1.1 Device parameters 29
- 1 31
- 1.7.2 Displaying values 32
- 1.8.- CCL 34
- 1.8.1 Driver options 34
- 1.8.1.1 Device parameters 34
- 1.9.- CCLEngine 36
- 1.9.1 Driver options 36
- 1.9.1.1 Device parameters 36
- 1.9.2 CCL Engine display 38
- 1.10.- CIRWATT 42
- 1.10.2 Driver options 42
- 1.10.2.1 Driver parameters 43
- 1.10.2.2 Device parameters 43
- 1.10.2.3 Contracted power 44
- 1.10.3 Displaying Contracts 45
- 1.11.- CIRWATT B 46
- 1.11.2 Driver options 46
- 1.11.2.1 Device parameters 47
- 1.11.2.2 Contracted power 49
- 1.11.3 Digital inputs 49
- 1.12.- CIRWATT B PREMIUM 50
- 1.12.2 Driver options 51
- 1.12.2.1 Device parameters 51
- 1.12.2.2 Contracted power 53
- 1.12.3 Digital inputs 54
- 1.13.- CDR-8 55
- 1.13.1 Driver options 55
- 1.13.1.1 Device parameters 55
- 1.13.2 Displaying values 58
- 1.14.- Client OPC 60
- 1.14.2 Driver options 61
- 1.14.2.1 Device parameters 61
- 1.14.2.1.1 Variables 62
- 1.15.- CLIENT POWERSTUDIO 65
- 1.15.2 Driver options 66
- 1.15.2.1 Driver Parameters 66
- 1.15.2.2 Device parameters 67
- 1.15.2.2.1 Variables 68
- 1.16.- COMPUTER PLUS 70
- 1.16.1 Driver options 70
- 1.16.1.1 Device parameters 70
- 1.17.- COMPUTER SMART 73
- 1.17.1 Driver options 73
- 1.17.1.1 Device parameters 73
- 1.18.- RS232/485 CONVERTER 77
- 1.19- TCP2RS CONVERTER 78
- 1.22.- GENERIC UDP CONVERTER 85
- 1.23.- GENERIC TCP CONVERTER 86
- 1.25.- CVM-144 87
- 1.25.1 Driver options 87
- 1.25.1.1 Device parameters 87
- 1.26.- CVM- 1D 91
- 1.26.1 Driver options 91
- 1.26.1.1 Device parameters 91
- 1.27.- CVM-96 94
- 1.27.1 Driver options 94
- 1.27.1.1 Device parameters 94
- 1.28.- CVM-B/BD 97
- 1.28.1 Modbus TCP connection 97
- 1.28.2 Driver options 98
- 1.28.2.1 Device parameters 98
- 1.29.- CVM-BC 102
- 1.29.1 Driver options 102
- 1.29.1.1 Device parameters 102
- 1.30.- CVM-C10 106
- 1.30.1 Driver options 106
- 1.30.1.1 Device parameters 106
- 1.31.- CVM-K 110
- 1.31.2 Driver options 111
- 1.31.2.1 Device parameters 111
- 1.32.- CVM-K2 115
- 1.32.1 Driver options 115
- 1.32.1.1 Driver Parameters 115
- 1.32.1.2 Device parameters 116
- 1.32.1.3 Expansion Cards 122
- 1.32.1.3.4 SD Memory 128
- 1.33.- CVM-K HAR 129
- 1.33.2 Driver options 129
- 1.33.2.1 Device parameters 129
- 1.34.1 Driver options 132
- 1.34.1.1 Device parameters 132
- 1.35.- CVM-MINI Ethernet 136
- 1.35.1 Driver options 136
- 1.35.1.1 Device parameters 136
- 1.36.- CVM-NET4 140
- 1.36.1 Driver options 140
- 1.36.1.1 Device parameters 140
- 1.37.- CVM-R8 143
- 1.37.1 Driver options 143
- 1.37.1.1 Device parameters 143
- 1.37.1.3 Variable limits 144
- 1.38.- CVM-SP 145
- 1.38.1 Driver options 145
- 1.38.1.1 Device parameters 145
- 1.39.- DH-96 148
- 1.39.1 Driver options 148
- 1.39.1.1 Device parameters 148
- 1.39.1.2 Inputs 152
- 1.40.- EDMk 154
- 1.40.1 Driver options 154
- 1.40.1.1 Device parameters 154
- 1.41.- EDS / EDS-3G 157
- 1.41.2 Driver options 157
- 1.41.2.1 Driver Parameters 158
- 1.41.2.2 Device parameters 159
- 1.41.2.2.1 Variables 160
- 1.42.1 Driver options 162
- 1.42.1.1 Device parameters 162
- 1.42.1.2 Device inputs 164
- 1.42.1.3 Display variables 166
- 1.43.- Generic IEC 168
- 1.43.1 Driver options 168
- 1.43.1.1 Device parameters 169
- 1.43.1.2 Contracted power 169
- 1.43.2 Files for downloading 170
- 1.44.- Generic Modbus 171
- 1.44.1 Driver options 171
- 1.44.1.1 Device parameters 171
- 1.45.- LM-24 M 177
- 1.45.1 Driver options 177
- 1.45.1.1 Device parameters 177
- 1.45.1.2 Device inputs 178
- 1.45.1.3 Variable limits 181
- 1.46.- LM25- M 182
- 1.46.1 Driver options 182
- 1.46.1.1 Device parameters 182
- 1.46.1.2 Device inputs 184
- 1.46.1.3 Variable limits 186
- 1.47.- LM4A-2IO-M 187
- 1.47.1 Driver options 187
- 1.47.1.1 Device parameters 187
- 1.47.1.2 Device inputs 188
- 1.47.1.3 Variable limits 190
- 1.48.- LM4I-4O-M 192
- 1.48.1 Driver options 192
- 1.48.1.1 Device parameters 192
- 1.48.1.2 Device inputs 193
- 1.48.1.3 Variable limits 195
- 1.49.- LM50-TCP 196
- 1.49.1 Driver options 196
- 1.49.1.1 Device parameters 196
- 1.49.1.2 Inputs 198
- 1.49.1.3 Variable limits 200
- 1.50.1 Driver options 201
- 1.50.1.1 Device parameters 201
- 1.50.- MKD 201
- 1.51.- MK-LCD 204
- 1.51.1 Driver options 204
- 1.51.1.1 Device parameters 204
- 1.52.- MP3/MP4 206
- 1.52.1 Driver options 206
- 1.52.1.1 Device parameters 206
- 1.53.- MR4 210
- 1.53.1 Driver options 210
- 1.53.1.1 Device parameters 210
- 1.53.1.2 Inputs / outputs 210
- 1.54.- PLC800 211
- 1.54.1 Driver options 211
- 1.54.1.1 Device parameters 211
- 1.55.- POWER NET 213
- 1.55.1 Driver options 213
- 1.55.1.1 Device parameters 213
- 1.56.- QNA -412/413 215
- 1.56.1 Driver options 215
- 1.56.1.1 Device parameters 215
- 1.57.- QNA-PT 219
- 1.57.1 Driver options 219
- 1.57.1.1 Device parameters 219
- 1.58.- RGU-10 / RGU-10 RA 223
- 1.58.1 Driver options 223
- 1.58.1.1 Device parameters 223
- 1.58.1.1.2 RGU-10 RA 225
- 1.58.2 Displaying values 227
- 1.58.2.1.2 RGU-10 RA 228
- 1.59.- RRM-C 229
- 1.59.1 Driver options 229
- 1.59.1.1 Device parameters 229
- 1.59.2 Displaying values 229
- 1.60.- R-440 231
- 1.60.2 Driver options 232
- 1.60.2.1 Driver parameters 232
- 1.60.2.2 Device parameters 233
- 1.60.2.2.1 Variables 235
- 1.61.- R-440 Embedded 236
- 1.61.1 Driver options 236
- 1.61.1.1 Device parameters 236
- 1.61.1.2 Inputs/Outputs 237
- 1.62.- TCP1RS+ 240
- 1.62.1 Driver options 242
- 1.62.1.1 Device parameters 242
- 1.63.- TCP2RS+ 244
- 1.63.2 Driver options 247
- 1.63.2.1 Device parameters 247
- 1.64.- TCP50–ALARM 248
- 1.64.1 Driver options 248
- 1.64.1.1 Device parameters 248
- 1.64.1.2 Device inputs 248
- 1.64.2 Viewing values 249
- 1.65.- TH-DG-RS485 250
- 1.65.1 Driver options 250
- 1.65.1.1 Device parameters 250
- 1.66.- TR8 252
- 1.66.1 Driver options 252
- 1.66.1.1 Device parameters 252
- 1.67.- TR16 254
- 1.67.1 Driver options 254
- 1.67.1.1 Device parameters 254
- 1.68.1 Driver options 257
- 1.68.1.1 Driver parameters 257
- 1.68.1.2 User management 257
- 1.69.- X2 261
- 1.69.1 Driver options 261
- 1.69.1.1 Device parameters 261
- 2.- Appendices 264
- 2.1.- Variables 264
- 2.1.1 Voltage 265
- 2.1.2 Current 267
- 2.1.3 Frequency 269
- 2.1.4 Power 270
- 2.1.5 Energy 274
- NIETy NIETy 276
- 2.1.6 Maximum demand 277
- 2.1.7 Harmonics 278
- 2.1.8 Pst / Plt 279
- 2.1.9 Inputs and Outputs 280
- 2.1.10 Counters 281
- 2.1.11.1 AFQ 282
- 2.1.11.2 C-14d 282
- 2.1.11.3 CBS-4 283
- 2.1.11.4 CBS-8, CDR-8 283
- 2.1.11.5 CCL 283
- 2.1.11.6 CIRWATT 284
- 2.1.11.7 COMPUTER SMART 284
- 2.1.11.8 CVM-K2 284
- 2.1.11.9 DH-96 285
- 2.1.11.10 EDS 285
- 2.1.11.11 MK D 285
- 2.1.11.12 MP3 / MP4 286
- 2.1.11.13 QNA 286
- 2.1.11.15 RRM-C 287
- 2.1.11.16 TAGREADER 287
- 2.1.11.17 TH-DG-RS485 288
- 2.1.11.18 TR8 288
- 2.1.11.19 TR16 288
- 2.1.11.20 X2 288
- 2.1.13 Device status 289
- 2.1.14 Event Variables 290
- CIRCUTOR, SA 292
- Vial Sant Jordi, s/n 292
Relacionado con productos y manuales para Instrumentos de medición Circutor PowerStudio Series
(52 paginas)
(51 paginas)
(50 paginas)
(56 paginas)
(56 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.042 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales