Circutor CDP-0 Manual de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
CDP
Instruction Manual 43
5.2.2. DHCP OPTION: YES
The unit will then display the parameters assigned by the DHCP server. The unit
will display the following fields which cannot be edited.
IP Configuration
The second line shows the IP address than has been dynamically assigned.
Figure 50: First setup screen if DHCP is YES.
NetMask and Gateway
The netmask is shown on the first line and the Gateway on the second.
Figure 51: Second setup screen if DHCP is YES.
Primary DNP and Secondary DNS
The preferred DNS server is shown on the first line and the alternative on the
second.
Figure 52: Third setup screen if DHCP is YES.
5.2.3. DHCP OPTION: NO
If the DHCP server is not activated, validate the NO option using the UP and
DOWN keys, moving to the next screen.
Figure 53: First setup screen if DHCP is NO.
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 73 74

Comentarios a estos manuales

Sin comentarios