Circutor CIRLAMP Series Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 102
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
1�- Insert the rst bracket, as shown in Figure 1�
Figure 1: DIN rail brackets installation ( step 1)�
2�- Insert the second bracket in the rst bracket, Figure 2.
Figure 2: DIN rail brackets installation ( step 2)�
3�- Push the brackets into the rail until fully installed,Figure 3.
Figure 3: DIN rail brackets installation ( step 3)�
Terminals, opening covers or removing elements can expose parts that are
hazardous to the touch while the unit is powered. Do not use the unit until it is
fully installed.
The unit must be connected to a power circuit that is protected with gL fuses (IEC 269) or
M fuses, with a rating of 1 to 2 A. It must be tted with a circuit breaker or equivalent device
for disconnecting the unit from the power supply mains.
11
Instruction Manual
CirLAMP system
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 101 102

Comentarios a estos manuales

Sin comentarios